HPE7-A01 Study Guide Brilliant HPE7-A01 Exam Dumps PDF [Q60-Q80]

Rate this post

HPE7-A01 Study Guide Brilliant HPE7-A01 Exam Dumps PDF

View HPE7-A01 Exam Question Dumps With Latest Demo

NEW QUESTION 60
Review the exhibit.

You are troubleshooting an issue with a 10 102.39 0/24 subnet which is also VLAN 1000 used Tor wireless clients on a pair of Aruba CX 8360 switches The subnet SVI is configured on the 8360 pair, and the DHCP server is a Microsoft Windows Server 2022 Standard with an IP address of 10 200 1.100. The
10.102.250.0/24 subnet is used for switch management.
A large number of DHCP requests are failing You are observing sporadic DHCP behavior across clients attached to the CX 6100 switch.
Which action may help fix the issue?

NEW QUESTION 61
When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

QSVI

MAC tables

UDLD

RPVST+

NEW QUESTION 62
A customer is using a legacy application that communicates at layer-2. The customer would like to keep this application working across the campus which is connected via layer-3. The legacy devices are connected to Aruba CX 6300 switches throughout the campus.
Which technology minimizes flooding so the legacy application can work efficiently?

Generic Routing Encapsulation (GRE)

EVPN-VXLAN

Ethernet over IP (EolP)

Static VXLAN

NEW QUESTION 63
Your Director of Security asks you to assign AOS-CX switch management roles to new employees based on their specific job requirements After the configuration was complete, it was noted that a user assigned with the administrators role did not have the appropriate level of access on the switch.
The user was not limited to viewing nonsensitive configuration information and a level of 1 was not assigned to their role Which default management role should have been assigned for the user?

sysadmin

operators

helpdesk

config

NEW QUESTION 64
You need to have different routing-table requirements With Aruba CX 6300 VSF configuration.
Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?

create a new VLAN, and attach the VRF to it.

Create a new routing table, and attach VLANS to it

Create a new SVI and use attach command.

Create a new VLAN. and attach the routing table to it

NEW QUESTION 65
How is Multicast Transmission Optimization implemented in an HPE Aruba wireless network?

“The optimal rate for sending multicast frames is based on the highest broadcast rate across all associated clients

When this option is enabled the minimum default rate for multicast traffic is set to 12 Mbps for 5 GHz

The optimal rate for sending multicast frames is based on the lowest broadcast rate across all associated clients.

The optimal rate for sending multicast frames is based on the lowest unicast rate across all associated clients.

NEW QUESTION 66
Your Aruba CX 6300 VSF stack has OSPF adjacency over SVI 10 with LAG 1 to a neighboring device The following configuration was created on the switch:

NEW QUESTION 67
A company with 10,281 employees recently deployed new HPE Aruba Networking Access Points at different branch offices. Wireless 802.IX authentication will be against a RADIUS server in the cloud. The security team is concerned that the traffic between the AP and the RADIUS server will be exposed.
What is the appropriate solution for this scenario?

Enable IPSec under Data Handling in HPE Aruba Networking Central

Configure RedSec on the AP and the RADIUS server.

Enable EAP-TLS on all wireless devices. Enable EAP-TTLS on all wireless devices.

NEW QUESTION 68
You need to create a keepalive network between two Aruba CX 8325 switches for VSX configuration How should you establish the keepalive connection?

SVI, VLAN trunk allowed all on ISL in default VRF

routed port in custom VRF

loopback 0 and OSPF area 0 in default VRF

SVI, VLAN trunk allowed all on ISL in custom VRF

NEW QUESTION 69
Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?

Hybrid Mode

Air Monitor

Spectrum Monitor

Dual Mode

NEW QUESTION 70
A client is connecting to 802.1X SSID that has been configured in tunnel mode with the default AP- group settings.
After receiving Access-Accept from the RADIUS server, the Aruba Gateway will send Access- Accept to the AP through which tunnel?

IPsec tunnel

Split tunnel

GRE tunnel

PAR tunnel

NEW QUESTION 71
Which statements are true about VSX LAG? (Select two.)

The total number of configured links may not exceed 8 for the pair or 4 per switch

Outgoing traffic is switched to a port based on a hashing algorithm which may be either switch in the pair

LAG traffic is passed over VSX ISL links only while upgrading firmware on the switch pair

Outgoing traffic is preferentially switched to local members of the LAG.

Up to 255 VSX lags can be configured on all 83xx and 84xx model switches.

The correct answers are A and D.
According to the web search results, VSX LAG is a feature that allows multiple PSKs to be used on a single SSID, providing device-specific or group-specific passphrases for enhanced security and deployment flexibility for headless IoT devices1. VSX LAGs span both aggregation switches and appear as one device to partner downstream or upstream devices or both when forming a LAG with the VSX pair2.
One of the statements that is true about VSX LAG is that the total number of configured links may not exceed 8 for the pair or 4 per switch1. This means that a VSX LAG across a downstream switch can have at most a total of eight member links, and a switch can have a maximum of four member links. When creating a VSX LAG, it is recommended to select an equal number of member links in each segment for load balancing1.
Another statement that is true about VSX LAG is that outgoing traffic is preferentially switched to local members of the LAG2. This means that when active forwarding and active gateway are enabled, north-south and south-north traffic bypasses the ISL link and uses the local ports on the switch. This optimizes the traffic path and reduces the load on the ISL link2.
The other statements are false or not relevant for VSX LAG. Outgoing traffic is not switched to a port based on a hashing algorithm, which may be either switch in the pair. This is a characteristic of MLAG (Multi-Chassis Link Aggregation), which is a different feature from VSX LAG. LAG traffic is not passed over VSX ISL links only while upgrading firmware on the switch pair. This is a scenario that may occur when performing hitless upgrades, which is a feature that allows software updates without impacting network availability. The number of VSX lags that can be configured on all 83xx and 84xx model switches is not 255, but depends on the switch model and firmware version. For example, the AOS-CX 10.04 supports up to 64 VSX lags for 8320 switches and up to 128 VSX lags for 8325 and 8400 switches.

NEW QUESTION 72
Which Aruba AP mode is sending captured RF data to Aruba Central for waterfall plot?

Hybrid Mode

Air Monitor

Spectrum Monitor

Dual Mode

NEW QUESTION 73
On AOS10 Gateways, which device persona is only available when configuring a Gateway-only group’?

Edge

Mobility

Branch

VPN Concentrator

NEW QUESTION 74
You need to have different routing-table requirements With Aruba CX 6300 VSF configuration.
Assuming the correct layer-2 VLAN already exists, how would you create a new SVI for a separate routing table?

create a new VLAN, and attach the VRF to it

Create a new routing table, and attach VLANS to it

Create a new SVI and use attach command

Create a new VLAN. and attach the routing table to it

NEW QUESTION 75
You need to configure an ACL on an Aruba switch to block HTTP traffic but allow HTTPS. Which of the following ACL rules accomplishes this?

permit tcp any any eq 443; deny tcp any any eq 80

deny tcp any any eq 80; permit tcp any any eq 443

deny tcp any any eq 443; permit tcp any any eq 80

permit tcp any any neq 80

NEW QUESTION 76
With the Aruba CX 6100 48G switch with uplinks of 1/1/47 and 1/1/48. how do you automate the process of resuming the port operational state once a loop on a client port is cleared?

Configure int 1/1/1-1/1/52 loop-protect disable timer.

Configure global loop-protect disable timer.

Configure int 1/1/1-1/1/46 loop-protect re-enable-timer.

Configure global loop-protect re-enable-timer.

NEW QUESTION 77
You are setting up a customer’s 15 headless loT devices that do not support 802.1X. What should you use?

Multiple Pre-Shared Keys (MPSK) Local

Clearpass with WPA3-PSK

Clearpass with WPA3-AES

Multiple Pre-Shared Keys (MPSK) with WPA3-AES

NEW QUESTION 78
The administrator notices that wired guest users that have exceeded their bandwidth limit are not being disconnected Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch.
An administrator has performed the following configuration

What is the most likely cause of this issue?

Change of Authorization has not been globally enabled on the switch

The SSL certificate for CPPM has not been added as a trust point on the switch

There is a mismatch between the RADIUS secret on the switch and CPPM.

There is a time difference between the switch and the ClearPass Policy Manager

NEW QUESTION 79
Drag and Drop Question
Match the topics of an AOS10 Tunneled mode setup between an AP and a Gateway. (Options may be used more than once or not at all.)

NEW QUESTION 80
In an ArubaOS 10 architecture using an AP and a gateway, what happens when a client attempts to join the network and the WLAN is configured with OWE?

Authentication information is not exchanged

The Gateway will not respond.

No encryption is applied.

RADIUS protocol is utilized.

Earning the Aruba Certified Campus Access Professional certification can open up new career opportunities in the field of IT networking. Aruba Certified Campus Access Professional Exam certification is recognized worldwide and demonstrates a level of expertise and proficiency in Aruba technologies. Additionally, certified professionals are eligible for advanced training and career advancement opportunities within their organizations.

Free HPE7-A01 Test Questions Real Practice Test Questions: https://www.dumpsreview.com/HPE7-A01-exam-dumps-review.html