[Sep 12, 2024] 100% Pass Guarantee for JN0-105 Dumps with Actual Exam Questions [Q51-Q66]

4.8/5 - (10 votes)

[Sep 12, 2024] 100% Pass Guarantee for JN0-105 Dumps with Actual Exam Questions

Today Updated JN0-105 Exam Dumps Actual Questions

Juniper JN0-105 Exam Syllabus Topics:

Topic	Details
Topic 1	Routing Fundamentals: This topic discusses pointing out basic routing concepts or functionality for Junos devices. Moreover, the topic also describes configuring or monitoring basic routing elements for a Junos device.
Topic 2	User Interfaces: This topic delves into identifying the concepts, operation, or functionality of the Junos user interface.
Topic 3	Routing Policy and Firewall Filters: The topic of Routing Policy and Firewall Filters covers routing policy and firewall filters on Junos devices. Furthermore, the topic also deals with routing policies and firewall filters on a Junos device.
Topic 4	Junos OS Fundamentals: It covers concepts, benefits, and functionality of the core elements of the Junos OS.
Topic 5	Networking Fundamentals: The topic networking fundamentals covers identifying the concepts and functionality of different fundamental elements of networking.

NO.51 Exhibit.

Referring to the exhibit, which routing configuration is required for these two users to access the remote server?

Users must connect directly to the router.

Users and the server require a default gateway.

Trunk ports must be enabled on the switch.

A routing protocol must be enabled on the router.

NO.52 How many rescue configuration files are supported on a Junos device?

NO.53 Exhibit
user@router> show route 192.168.100.2
inet.O: 15 destinations, 17 routes (15 active, 0 holddown, 0 hidden) Limit/Threshold: 1048576/1048576 destinations
+ = Active Route, – = Last Active, * = Both 192.168.100.2/32*[OSPF/IO] 00:14:29, metric 1
> to 172.16.1.6 via ge-0/0/1.0 [BGP/170] 00:06:49, localpref 100
AS path: 65102 I, validation-state: unverified > to 172.16.1.6 via ge-0/0/1.0 Referring to the exhibit, which statement is correct?

The BGP path is the only active route.

The BGP route is preferred over the OSPF route.

The OSPF path is the only active route.

/ Traffic is load-balanced across two routes.

NO.54 You issue the monitor traffic interface ge-0/0/0 command.
What will this command accomplish?

It displays real-time statistics for interface ge-0/0/0.

It displays an operational summary of ge-0/0/0.

It displays the MTU and MAC address for ge-0/0/0.

It displays a packet capture on interface ge-0/0/0.

NO.55 Exhibit
{hold:node0}[edit]
root# set system root-authentication ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don’t inherit configuration data from these groups
encrypted-password Encrypted password string
load-key-file File (URL) containing one or more ssh keys
plain-text-password Prompt for plain text password (autoencrypted)
> ssh-dsa Secure shell (ssh) DSA public key string
> ssh-rsa Secure shell (ssh) RSA public key string
{hold:node0}[edit]
root# set system root-authentication plain-text-password
New password:
Retype new password:
{hold:node0}[edit]
root# commit and-quit
[edit interfaces]
‘ge-0/0/0’
HA management port cannot be configured
error: configuration check-out failed
{hold:node0}[edit]
root#
You are unable to remotely access your Juniper device using the CLI.
Referring to the exhibit, which command would you add to the existing configuration to enable remote CLI access?

load factory-default

set system root-authentication plain-text-password

set system services ssh

set system login idle-timeout 20

NO.56 Click the Exhibit button.

Referring to the exhibit, what should be configured on R1 to advertise a default static route into OSPF?

a firewall filter

a routing policy

a loopback interface

a management interface

NO.57 Exhibit
[edit system archival] user@router# show configuration {
transfer-on-commit; archive-sites {
“scp://[email protected] : /archive” password ## SECRET-DATA
“ftp://[email protected]:/archive” password “$9…”; ## SECRET-DATA
.
Referring to the exhibit, where are the configuration backup files stored?

Files are stored to the SCP site and the FTP site in a round-robin manner.

Files are stored to the SCP site and the FTP site simultaneously.

Files are stored to any site as selected by Junos internally.

Files are stored to the SCP site but if the transfer fails, then to the FTP site.

NO.58 Which protocol is responsible for learning an IPv4 neighbor’s MAC address?

Address Resolution Protocol (ARP)

Network Address Translation (NAT)

Media Access Control Security (MACsec)

Neighbor Discovery Protocol (NDP)

NO.59 What are two types of transit traffic that traverse the forwarding plane of a Layer 3 router? (Choose two.)

unicast traffic

multicast traffic

exception traffic

broadcast traffic

NO.60 What does the user@router> clear log ospf-trace command accomplish?

Logging data into ospf-trace is stopped.

Trace parameters are removed from the OSPF protocol configuration.

Data in the ospf-trace file is removed and logging continues.

The ospf-trace file is deleted.

NO.61 Which two actions happen when multiple users issue the configure exclusive command to enter configuration mode on a Junos device? (Choose two.)

Other users can enter configuration mode.

The candidate configuration is unlocked.

The candidate configuration is locked.

Other users cannot enter configuration mode.

NO.62 Which three benefits occur when operating an interior gateway protocol (IGP) in an autonomous system (AS)? (Choose three.)

IGPs automatically distribute static routing information.

IGPs determine the optimal paths for data transmission.

IGPs learn prefixes in the global Internet’s routing table.

IGPs react very fast to network change.

IGPs learn everything about the subnets and best paths within your network.

NO.63 Which two statements apply to the Routing Engine functions? (Choose two.)

It responds to ping and traceroute commands.

It maintains the routing tables.

It does not process routing updates.

It processes the transit traffic.

NO.64 Click the Exhibit button.

Referring to the exhibit, what is the source IP address of the ping that was executed?

10.12.0.2

10.23.0.2

10.23.0.3

10.24.0.4

NO.65 Exhibit
user@router> show route 192.168.36.1
inet.O: 5 destinations, 6 routes (5 active, 0 holddown, 0 hidden) + = Active Route, – = Last Active, * = Both
192.168.36.1/32 *[Static/5] 00:00:31
> to 10.1.1.2 via ge-0/0/10.0 [OSPF/IO] 00:02:21, metric 1 > to 10.1.1.2 via ge-0/0/10.0 Referring to the exhibit, which route(s) will be selected by Junos for packet forwarding?

The OSPF route will be selected.

The static route will be selected.

The Junos OS randomly selects one route.

The Junos OS selects both routes.

NO.66 Exhibit
{hold:node0}[edit]
root# set system root-authentication ?
Possible completions:
+ apply-groups Groups from which to inherit configuration data
+ apply-groups-except Don’t inherit configuration data from these groups encrypted-password Encrypted password string load-key-file File (URL) containing one or more ssh keys plain-text-password Prompt for plain text password (autoencrypted)
> ssh-dsa Secure shell (ssh) DSA public key string
> ssh-rsa Secure shell (ssh) RSA public key string
{hold:node0}[edit]
root# set system root-authentication plain-text-password
New password:
Retype new password:
{hold:node0}[edit]
root# commit and-quit
[edit interfaces]
‘ge-0/0/0’
HA management port cannot be configured
error: configuration check-out failed
{hold:node0}[edit]
root#
You are unable to remotely access your Juniper device using the CLI.
Referring to the exhibit, which command would you add to the existing configuration to enable remote CLI access?