350-501 Exam Dumps – PDF Questions and Testing Engine [Q168-Q184]

5/5 - (1 vote)

350-501 Exam Dumps – PDF Questions and Testing Engine

350-501 Dumps – The Sure Way To Pass Exam

NEW QUESTION 168
Refer to the exhibit.

An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.

NEW QUESTION 169
Refer to the exhibit:

What does the REST API command do?

It retrieves the information requested by Descriptions xml

It removes the information identified by Descriptions xml

It executes the commands specified in Descriptions xml

It displays the information identified by Descriptions xml

NEW QUESTION 170
Refer to the exhibit. An ISP provides shared VoIP Extranet services to a customer in VRF-100 with these settings:
– The VoIP services are hosted in the 198.19.100.0/24 space.
– The customer has been assigned the 198.18.1.0/29 IP address block.
– VRF-100 is assigned import and export route target 65010:100.
Which configuration must the engineer apply to PE-1 to provision VRF-100 and provide access to the shared services?

vrf definition VRF-100
rd 172.17.255.1:100
!
address-family ipv4
export map VRF-100-EXPORT
import map VRF-100-IMPORT
exit-address-family
!
route-map VRF-100-EXPORT permit 10
match ip address prefix-list VRF-100-ALLOWED-EXPORT
set extcommunity rt 65010:100 65010:2999
route-map VRF-100-EXPORT permit 20
set extcommunity rt 65010:100
!
route-map VRF-100-IMPORT permit 10
match extcommunity VRF-100-RT SHARED-SERVICES
!
ip extcommunity-list standard SHARED-SERVICES permit rt 65010:1999
ip extcommunity-list standard VRF-100-RT permit rt 65010:100
ip prefix-list VRF-100-ALLOWED-EXPORT seq 5 permit 198.18.1.0/29

vrf definition VRF-100
rd 172.17.255.1:100
!
address-family ipv4
export map VRF-100-EXPORT
route-target import 65010:100
route-target import 65010:2999
exit-address-family
!
route-map VRF-100-EXPORT permit 10
match ip address prefix-list VRF-100-ALLOWED-EXPORT
set extcommunity rt 65010:100 65010:1999
route-map VRF-100-EXPORT permit 20
set extcommunity rt 65010:100
!
ip prefix-list VRF-100-ALLOWED-EXPORT seq 5 permit 198.18.1.0/29

vrf definition VRF-100
rd 172.17.255.1:100
!
address-family ipv4
export map VRF-100-EXPORT
route-target import 65010:100
route-target import 65010:1999
exit address-family
!
route-map VRF-100-EXPORT permit 10
match ip address prefix-list VRF-100-ALLOWED-EXPORT
set extcommunity rt 65010:100 65010:2999
route-map VRF-100-EXPORT permit 20
set extcommunity r 65010:100
!
ip prefix-list VRF-100-ALLOWED-EXPORT seq 5 permit 198.18.1.0/29

vrf definition VRF-100
rd 172.17.255.1:100
!
address-family ipv4
route-target export 65010:100
route-target export 65010:1999
route-target import 65010:100
route-target import 65010:2999
exit-address-family

NEW QUESTION 171
Refer to the exhibit.

An engineer wants to determine which paths are best, second best, third best, and fourth best. Drag and drop the peer addresses on the left to the corresponding BGP best-path selection order on the right.

NEW QUESTION 172
Refer to the exhibit:

What is the URL used for with REST API?

It is used to contact a URL filter to determine the efficacy of a web address

It is used to send a TACACS+ authentication request to a server

It is used to send a message to the APIC to perform an operation on a managed object or class operator

It is used to initiate an FTP session to save a running configuration of a device.

NEW QUESTION 173

Refer to the exhibit. A network engineer is configuring MPLS LDP synchronization on router R1. Which additional configuration must an engineer apply to R1 so that it will synchronize to OSPF process 1?

NEW QUESTION 174

Refer to the exhibit Which effect of this configuration is true?

R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage.

R1can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer.

R1 can failover to any peer.

R1 can failover only to a peer that is configured for LDF SSO/NSF.

NEW QUESTION 175
Refer to the exhibit:

Which statement supports QPPB implementation?

QoS policies are identified in the MPLS forwarding table

QoS policies rely exclusively on BGP attributes to manipulate traffic

QoS policies use BGP to gain full coverage on the network.

QPPB policies affect only egress traffic

NEW QUESTION 176
A network engineer must enable the helper router to terminate the OSPF graceful restart process.
If it detects any changes in the LSA. Which command enables this feature?

nsf Cisco helper disable

nsf ietf helper strict-lsa-checking

nsf cisco enforce global

nsf ietf helper disable

NEW QUESTION 177
What is the characteristic of the Tl-LFA?

It guarantees a loop-free path for all interfaces in the OSPf- super backbone .

It applies on each area and instance and makes all the interfaces inherit the configuration

It guarantees a loop-free path for all areas configured m OSPF

It applies only on the instance and makes at the interfaces inherit the configuration

NEW QUESTION 178
How does Cisco MPLS TE use OSPF extensions to allow for optimized transit between a headend router and a destination router?

Router LSAs share router link advertisements to each router within the MPLS environment so that tunnels can be built bidirectionally.

ASBR Summary LSAs share OSPF domain information so that the two routers know how to reach each other during tunnel setup.

Network LSAs share RSVP information to build the tunnel between the two routers.

Opaque LSAs calculate and establish unidirectional tunnels that are set according to the network constraint.

NEW QUESTION 179
Refer to the exhibit. A network administrator is implementing IGMP to enable multicast feed transmission to the receiver.
Which configuration must the administrator deploy on GW1 to permit IGMP Joins only to the assigned (S, G) feed?

NEW QUESTION 180
Drag and drop the technologies from the left onto the correct definitions on the right.

NEW QUESTION 181
Refer to Exhibit:

A network engineer must update the routing toward the web server with IP address 35.22.13.1. The primary path must be configured via the neighbor router with ID 1.1.1.1. However, local-preference configuration is not permitted on R1. Which task must the engineer perform on R1 to complete the implementation?

Configure the device to choose the best MED from the same AS.

Set the device to ignore the conditional MED if the route originated in a different autonomous system.

Enable MED comparison between routes from neighbors in different AS.

Implement deterministic MED to choose the best route from the different AS.

NEW QUESTION 182
Refer to the exhibit. A network engineer is implementing a BGP protocol. Which effect of the local-as keyword in this configuration is true?