Cisco 300-510 Dumps – 100% Cover Real Exam Questions (Updated 101 Questions) [Q55-Q75]

5/5 - (1 vote)

Cisco 300-510 Dumps – 100% Cover Real Exam Questions (Updated 101 Questions)

Real 300-510 dumps – Real Cisco dumps PDF

QUESTION 55
What is used by SR-TE to steer traffic through the network?

shortest path calculated by IGP

dynamic rules

path policy

explicit maps

QUESTION 56
Refer to the exhibit.

Which tree does multicast traffic follow?

shared tree

MDT default

source tree

MDT voice

QUESTION 57
What can be used to determine a path from the head-end to a tail-end router when implementing SR-TE with a head-end, with little information on the network topology?

traffic controller

path computation engine

tail-end router

SNMP server

QUESTION 58
For which reason can two devices fail to establish an OSPF neighbor relationship?

The two devices have different process IDs

The two devices have different network types

The two devices have different router IDs

The two devices have the same area ID

QUESTION 59
Refer to the exhibit.

Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?

It must be configured for graceful restart

It must be configured with a route reflector

It must be configured with send labels

It must be configured with PIC edge

QUESTION 60
Refer to the exhibit. Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed.
Which statement about this configuration is true?

Router 1 must define an explicit path to router 2

Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces

Router 2 must have a tunnel interface created with router 1 as the destination

Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1

QUESTION 61
Refer to the exhibit.

Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed. Which statement about this configuration is true?

Router 1 must define an explicit path to router 2

Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces

Router 2 must have a tunnel interface created with router 1 as the destination

Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1

QUESTION 62
Refer to the exhibits.

All links inside the network are configured at a default cost of one inside the fully converged OSPF domain.
Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?

Interface GigabitElhemet 0/0. The tie breaker of the node index priority is lower and trumps the path cost.

Interface GigabitEthernet 0/1. The tie breaker of the path cost being lower. The node index priority does not impact this selection process.

Interface GigabitEthernet 0/1. The tie breaker of the node index priority is lower and trumps the path cost.

Interface GigabitEthernet 0/0. The tier breaker of the path cost being lower. The node index priority does not impact this selection process.

QUESTION 63
Refer to the exhibit.

A network operator wants to expand the segment routing global block in upcoming maintenance. The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.
Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?

Option A

Option B

Option C

Option D

QUESTION 64
Refer to the exhibit.

A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS topology. Which configuration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?

Option A

Option B

Option C

Option D

QUESTION 65
Refer to the exhibit.

Routers RA and RB are IS-IS peers configured for NSF but router RC is an IS-IS peer without NSF capability If RA undergoes processor switchover what is the effect on the network environment?

If RC is operating without the Cisco configuration option all three routers tear down their peering relationships and re-establish peering

All peer relationships remain up and the link-state database is unchanged

All peer relationships remain up, but the link-state database is rebuilt on each device

If RC is operating without the Cisco configuration option only 2 routers tear down their peering relationships and re-establish peering

QUESTION 66
A network consultant is troubleshooting IS-IS instances to identify why a routing domains is having communication problems between the two instances.
Which description of the possible cause of issues in the routing domain is true?

The same interface cannot be advertised in two different IS-IS instances

The IS-IS “ISP” and “ISP2” instances are unrelated and unable to intercommunicate

The configured IS-IS NSEL value is not allowing the routing systems to establish a neighborship

The interface mode ip router is-is command was not included in the script

QUESTION 67
A network operator working for a telecommunication company with an employee id: 4074:92:707 is planning to implement the Nonstop Forwarding (NSR) feature on the customer’s core network.
After getting the configuration ready for NSR. on which router should the operator implement NSR changes?

on the CE router

on the ASBR router

on the ABR router

on the PE router

QUESTION 68
Refer to the exhibit.

XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?

Option A

Option B

Option C

Option D

QUESTION 69
Refer to the exhibit. P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied.
The BGP session is not coming up. Assume that there is no IP reachability problem and both routers can open tcp port 179 to each other.
Which two actions fix the issue? (Choose two.)

Change MD5 to HMAC-SHA1-12

Change MD5 to HMAC-ESP

Change MD5 to SHA-1

Change MD5 to HMAC-MD5

Remove the send and accept lifetime under key 1

QUESTION 70
Refer to the exhibit. P1 and PE3 Cisco IOS XR routers are directly connected and have this configuration applied.
The BGP session is not coming up.
Assume that there is no IP reachability problem and both routers can open tcp port 179 to each other.
Which action fixes the issue?

Change HMAC-MD5 to HMAC-SHA1-20

Configure the send and accept lifetime under key 1

Change HMAC-MD5 to MD5

Change HMAC-MD5 to HMAC-SHA1-12

QUESTION 71

Refer to the exhibit. Which effect of this configuration is true?

It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.

It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds

It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds

It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds

QUESTION 72
Refer to the exhibit.

After troubleshooting an OSPF adjacency issue, routers 1, 2, and 3 have formed OSPF neighbor relationships. Which statement about the configuration is true?

Router 2 receives a Type 5 LSAs from router 1 for its connected subnets

Router 2 uses router 3 as the next hop for 192.168.0.0/24

Router 2 uses router 1 as the next hop for 192.168.0.0/24

Router 2 receives a Type 7 LSAs from router 3 for its connected subnets

QUESTION 73
Refer to the exhibit.

Which LSA type is indicated by this router output?

type 3 LSA

type 4 LSA

type 1 LSA

type 2 LSA

QUESTION 74
Refer to the exhibits.

A network operator is troubleshooting packet loss seen from the R1 loopback interface to the R2 loopback interface over the core network. The operator is attempting to identify the next leg in the path from PE1. Which interface and label path should the operator investigate next?

PE1 – Gi0/0/0/3 – forwarding label 24002

PE1 – Gi0/0/0/2 – forwarding label 24002

PE1 – Gi0/0/0/3 – forwarding label 24001

PE1 – Gi0/0/0/2 – forwarding label 24001

QUESTION 75
Refer to the exhibit.

Which two commands must the engineer configure for the company’s PIM-PIM network to enable Auto-RP mappings to be sent over the FastEthernet0/0 interface without affecting normal operation? (Choose two)

enable auto-rp listener

enable sparse-dense mode

enable sparse-mode

enable Auto-RP announcements

enable dense mode

How to book the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam

Typically, up to six weeks in advance and as late as the same day, you can schedule an exam. You must follow these steps to participate in the Implementing Cisco Service Provider Advanced Routing Solutions 300-510 SPRI exam test:

Step 1: Visit the Pearson VUE website by clicking here
Step 3: Login or create an account
Step 3: Enter the exam number i.e., 300-510
Step 3: Follow the details on the website
Step 4: Pay for your exam via credit card or exam vouchers

Realistic DumpsReview 300-510 Dumps PDF – 100% Passing Guarantee: https://www.dumpsreview.com/300-510-exam-dumps-review.html