[Q12-Q27] Updated NSE6_FWF-6.4 Dumps PDF – NSE6_FWF-6.4 Real Valid Brain Dumps With 31 Questions!

5/5 - (1 vote)

Updated NSE6_FWF-6.4 Dumps PDF – NSE6_FWF-6.4 Real Valid Brain Dumps With 31 Questions!

100% Free NSE6_FWF-6.4 Exam Dumps Use Real NSE 6 Network Security Specialist Dumps

NO.12 Which two statements about background rogue scanning are correct? (Choose two.)

A dedicated radio configured for background scanning can support the connection of wireless clients

When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP

Background rogue scanning requires DARRP to be enabled on the AP instance

A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band

NO.13 Refer to the exhibit.

If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?

Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility

Areas with the signal strength weaker than -68 dB are cut out of the map

Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor

Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.

NO.14 Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)

Gathering details about on site visitors

Predicting the number of guest users visiting on-site

Comparing current data with historical records

Reporting potential threats by guests on site

NO.15 Where in the controller interface can you find a wireless client’s upstream and downstream link rates?

On the AP CLI, using the cw_diag ksta command

On the controller CLI, using the diag wireless-controller wlac -d sta command

On the AP CLI, using the cw_diag -d sta command

On the controller CLI, using the WiFi Client monitor

NO.16 Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)

AP Manager

FortiAP Cloud

FortiSwitch

FortiGate

NO.17 Which two phases are part of the process to plan a wireless design project? (Choose two.)

Project information phase

Hardware selection phase

Site survey phase

Installation phase

NO.18 When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)

81 Tunnel-Private-Group-ID

65 Tunnel-Medium-Type

83 Tunnel-Preference

58 Egress-VLAN-Name

64 Tunnel-Type

NO.19 Refer to the exhibits.
Exhibit A

Exhibit B

The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?

WPA2 Enterprise

WPA3 Enterprise

WPA2 Personal and radius MAC filtering

Open, with radius MAC filtering

NO.20 Refer to the exhibit.

What does the asterisk (*) symbol beside the channel mean?

Indicates channels that can be used only when Radio Resource Provisioning is enabled

Indicates channels that cannot be used because of regulatory channel restrictions

Indicates channels that will be scanned by the Wireless Intrusion Detection System (WIDS)

Indicates channels that are subject to dynamic frequency selection (DFS) regulations

NO.21 Refer to the exhibits.
Exhibit A

Exhibit B

The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?

WPA2 Enterprise

WPA3 Enterprise

WPA2 Personal and radius MAC filtering

Open, with radius MAC filtering

NO.22 What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?

DHCP

Static

Broadcast

Multicast

NO.23 Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.

DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.

DARRP measurements can be scheduled to occur at specific times.

DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.

NO.24 Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?

Increase the transmission power of the AP radios

Enable frequency handoff on the AP to band steer clients

Reduce the number of wireless networks being broadcast by the AP

Install another AP in the reception area to improve available bandwidth

NO.25 Which factor is the best indicator of wireless client connection quality?

Downstream link rate, the connection rate for the AP to the client

The receive signal strength (RSS) of the client at the AP

Upstream link rate, the connection rate for the client to the AP

The channel utilization of the channel the client is using

NO.26 When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)

An X.509 certificate to authenticate the client

An X.509 to authenticate the authentication server

A WPA2 or WPA3 personal wireless network

A WPA2 or WPA3 Enterprise wireless network

509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.

NO.27 Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)

Gathering details about on site visitors

Predicting the number of guest users visiting on-site

Comparing current data with historical records

Reporting potential threats by guests on site