New (2025) Fortinet FCP_FMG_AD-7.4 Exam Dumps [Q27-Q44]

5/5 - (1 vote)

New (2025) Fortinet FCP_FMG_AD-7.4 Exam Dumps

Best Way To Study For Fortinet FCP_FMG_AD-7.4 Exam Brilliant FCP_FMG_AD-7.4 Exam Questions PDF

Fortinet FCP_FMG_AD-7.4 Exam Syllabus Topics:

Topic	Details
Topic 1	Troubleshooting: This section covers how to fmiliarize with FortiManager deployment scenarios and troubleshoot issues related to imports, installations, device-level, ADOM-level, and system-level concerns.
Topic 2	Device Manager: In this domain, the focus is on how to register devices within ADOMs, implement configuration changes using scripts, and troubleshoot using the revision history.
Topic 3	Advanced Configuration: This domain explains FortiManager’s high availability (HA), configures FortiGuard services and works with the global database ADOM.
Topic 4	Policy and Objects: This section deals with how to manage policies and objects, oversee ADOM revisions, configure workspace mode, and conduct policy imports and installations.
Topic 5	Administration: This section covers how to understand FortiManager capabilities, perform initial configurations, and set up administrative domains (ADOMs).

NO.27 An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?

Trainer is not a part of workflow approval group.

Trainer must close Student’s workflow session before approving the request.

Trainer must first create their own workflow session to approve student session.

Trainer does not have full rights over this ADOM.

NO.28 Refer to the exhibit. Which two statements about the output are true? (Choose two.)

Configuration changes have been installed on FortiGate, which means the FortiGate configuration has been changed.

The latest revision history for the managed FortiGate does match the FortiGate running configuration.

Configuration changes directly made on FortiGate have been automatically updated to the device-level database.

The latest revision history for the managed FortiGate does not match the device-level database.

NO.29 What will be the result of reverting to a previous revision version in the revision history?

It win install configuration changes to managed device automatically.

It will tag the device settings status as Auto-Update.

It will modify the device-level database.

It will generate a new version ID and remove all other revision history versions.

NO.30 Refer to the exhibit. An administrator is about to add the FortiGate device to FortiManager using the discovery process. FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.

What is the expected result?

During discovery, FortiManager uses only the FortiGate serial number to establish the connection.

During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.

During discovery, FortiManager sets the NATed device IP address on FortiGate.

During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.

NO.31 An administrator runs the reload failure command diagnose test deploymanager reloadconf
<deviceid> on FortiManager.
What does this command do?

It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It reloads the policy package from the FortiManager to FortiGate.

It installs the latest configuration on the specified FortiGate and updates the revision history database.

NO.32 Which statement about the upgrade of ADOMs on FortiManager is true?

To ensure database consistency, you must upgrade an ADOM before you upgrade the devices in it.

Upgrading the FortiManager version upgrades all existing ADOMs automatically.

You cannot import policies from a device until its FortiOS version matches the ADOM version.

ADOMs using global objects can be upgraded before or after upgrading the global database ADOM.

NO.33 Refer to the exhibit. Given the configuration shown in the exhibit, what are two results from this configuration? (Choose two.)

You can validate administrator login attempts through external servers.

The same administrator can lock more than one ADOM at the same time.

Two or more administrators can make configuration changes at the same time, in the same ADOM.

Concurrent read-write access to an ADOM is disabled.

NO.34 Refer to the exhibit. What can you conclude from the failed installation log shown in the exhibit?

Policy ID 2 is installed in the disabled state.

Policy ID 2 is installed without the remote user student.

Policy ID 2 will not be installed.

Policy ID 2 is installed without a source address.

NO.35 When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

FortiManager will not push the CLI commands as part of the installation that will cause the tunnel to go down.

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

NO.36 Which configuration setting for FortiGate is part o an ADOM-level database on FortiManager?

NSX-T Service Template

Routing

SNMP

Security profiles

NO.37 If both FortiManager and FortiGate are behind NAT devices, what are the two expected results?
(Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager non-NATed IP address is configured on FortiGate under central management.

If the FGFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

NO.38 An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package. Fortinet. in the custom ADOM1. What happens to the Fortinet policy package when it is created?

You must assign the global policy package from the global ADOM.

The global policy package is automatically assigned.

You must reapply the global policy package to ADOM1.

You can select the option to assign the global policies.

NO.39 In the event that one of the secondary FortiManager devices fails, which action must be performed to return the FortiManager HA manual mode to a working state?

The FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

Reboot the failed device to remove its IP from the primary device.

Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP of the failed device.

Reconfigure the primary device to remove the peer IP of the failed device.

NO.40 Refer to the exhibit. In the event that the monitored interface for the primary FortiManager device fails, which action must you perform to return FortiManager high availability (HA) to a working state?

Manually promote one of the working secondary devices to the primary role, and reboot the old primary device to remove the peer IP address of the failed device.

Reboot the current primary device to force a secondary device to become the new primary.

The FortiManager HA failover is transparent to administrators and does not require any additional action.

Reconfigure the primary device to remove the peer IP address of the failed device from its configuration.

NO.41 What is the purpose of ADOM revisions?

To save the current state of the whole ADOM

To save the current state of all policy packages and objects for an ADOM

To revert individual policy packages and device-level settings for a managed FortiGate

To save the FortiManager configuration in the System Checkpoints

NO.42 Which output is displayed right after moving the ISFW device from one ADOM to another?

NO.43 Exhibit.

What is true about the objects highlighted in the image?

They can be set to optional or required.

They are available across all ADOMs by default.

They can be used as variables in scripts.

They cannot be created in the global database ADOM.

NO.44 An administrator wants to create a policy on an ADOM that is in backup mode and install it on a FortiGate device in the same ADOM. How can the administrator perform this task?

The administrator must use the Policy & Objects section to create a policy first.

The administrator must use a FortiManager script.

The administrator must disable the FortiManager offline mode first.

The administrator must change the ADOM mode to Advanced to bring the FortiManager online.