[Full-Version] 2026 New H35-580_V2.0 Actual Exam Dumps, Huawei Practice Test [Q14-Q29]

5/5 - (1 vote)

[Full-Version] 2026 New H35-580_V2.0 Actual Exam Dumps, Huawei Practice Test

Study HIGH Quality H35-580_V2.0 Free Study Guides and Exams Tutorials

Huawei H35-580_V2.0 certification exam covers a wide range of topics, including 5G network architecture, radio frequency (RF) planning, 5G network deployment, 5G network optimization, and 5G network troubleshooting. H35-580_V2.0 exam is designed to assess the candidates’ knowledge and skills in these areas with practical scenarios and case studies. HCIA-5G-RNP&RNO V2.0 certification demonstrates the candidate’s proficiency in the latest 5G technologies and their ability to apply them in real-world scenarios. With the increasing demand for professionals with 5G skills, the Huawei H35-580_V2.0 certification is an excellent way to enhance one’s career prospects in the telecommunications industry.

Huawei H35-580_V2.0: HCIA-5G-RNP&RNO V2.0 exam is a certification exam that validates the knowledge and skills of professionals in the field of 5G Radio Network Planning and Optimization. H35-580_V2.0 exam is designed for individuals who are interested in becoming 5G network engineers, planners, and optimizers. H35-580_V2.0 exam tests the candidates on their understanding of the 5G network architecture, radio frequency planning, and optimization techniques.

NO.14 Which of the following in the terminal capability report indicates that the terminal supports antenna switching for SRS?

SupportedsRs-Resourse

maxNumberSRS

SupportedSRS-AntennaSwitching

SupportedSRS-TxPortSwith

The capability field SupportedSRS-AntennaSwitching explicitly indicates whether the UE supports antenna switching for Sounding Reference Signals (SRS).

NO.15 The terminal can send a power control command to the base station to control the transmit power of the PDSCH.

True

False

The UE does not control PDSCH transmit power. The gNB determines downlink transmission power, while the UE only reports measurements such as CQI, PMI, and RI.

NO.16 On a 5G network, the NAS layer uses 5G-GUTI to replace IMSI as the temporary ID of a UE for security reasons.

True

False

Explanation
According to the 5G-GUTI – 5G Globally Unique Temporary Identity, the NAS layer uses 5G-GUTI to replace IMSI as the temporary ID of a UE for security reasons. The 5G-GUTI is allocated by the AMF (Core Access and Mobility Management Function) at the time of network registration, and it is composed of the GUAMI (Globally Unique AMF ID) and the 5G-TMSI (5G Temporary Mobile Subscriber Identity).

NO.17 Which of the following boards in a base station support CPU usage measurement?(Select All that Apply)

DFAN

DUB8P

DUPEU

DUMPT

Explanation
According to the Career Certification – Huawei Enterprise, DUB8P, DUPEU, and DUMPT are boards in a base station that support CPU usage measurement, which correspond to options B, C, and D. DFAN is a fan board that does not support CPU usage measurement, which corresponds to option A.

NO.18 Which of the following materials does not need to be prepared before site survey?

Local map

Site survey table

5G antenna height table

Engineering file

Explanation
According to the 5G Site Survey Guide (V1.0) (PDF)-EN, the engineering file is not a material that needs to be prepared before site survey. The engineering file is a document that records the site survey results and the design plan for the site. The engineering file is generated after the site survey is completed and approved by the customer. The materials that need to be prepared before site survey are:
Local map: A map of the area where the site is located, showing the roads, buildings, landmarks, and other features. The local map helps the site survey team to plan the route, identify the site location, and evaluate the surrounding environment.
Site survey table: A table that lists the items and parameters that need to be checked and measured during the site survey, such as antenna installation space, equipment room space and load bearing capacity, power supply, grounding, lightning protection, cable routing, etc. The site survey table helps the site survey team to conduct a comprehensive and systematic inspection of the site conditions and record the data.
5G antenna height table: A table that shows the recommended antenna height for different scenarios and frequency bands based on empirical data and theoretical calculations. The 5G antenna height table helps the site survey team to determine the optimal antenna installation height for achieving the best coverage and performance.
Therefore, the correct answer is D.

NO.19 Which of the following factors does not need to be considered during PUSCH power calculation?

Number of PUSCH RBs

SCS configuration for the PUSCH

MCS index of the PUSCH

Number of PUSCH symbols in the time domain

According to the 5G NR Uplink Power Control Procedure , MCS index of the PUSCH is not a factor that needs to be considered during PUSCH power calculation. The MCS index determines the modulation and coding scheme of the PUSCH, but it does not affect the transmit power. The other factors, such as number of PUSCH RBs, SCS configuration for the PUSCH, and number of PUSCH symbols in the time domain, are all involved in the PUSCH power calculation formula.

NO.20 In the PUSCH power algorithm, the path loss is calculated by measuring which of the following channels?

SSB

PDSCH

PDCCH

CSI-RS

The UE estimates path loss based on measurements of the SSB reference signal and the configured reference signal power.

NO.21 If the MeasAndMobParametersMRDC of the terminal MR-DC capability contains the independentGapConfig information element, which GAP configuration is recommended for NR inter-frequency measurement?

Per gNodeB GAP

Per FR1 GAP

Per eNodeB GAP

Per UE GAP

When the UE supports independentGapConfig, Per UE GAP is the recommended configuration because it provides flexible measurement gap management across radio technologies.

NO.22 In NSA networking, if only 5G sends a dropped call, which of the following air interface messages will the terminal receive?

RRC Release

RRC Reconfiguration

SCG Failure Information

RRC Reestablishment

When only the NR secondary cell group fails:
The UE reports SCG Failure Information.
The network may subsequently issue RRC Release depending on recovery procedures.
(This is a multiple-answer question.)

NO.23 5G can meet service requirements in scenarios with a mobility speed of up to 500 km/h.

True

False

According to the Huawei Career Certification Learning , 5G can meet service requirements in scenarios with a mobility speed of up to 500 km/h, which is much higher than the 4G limit of 350 km/h.

NO.24 In each TTI scheduling, the scheduling priority of the control plane information is absolutely higher than the scheduling of the data plane.

True

False

Control-plane messages are essential for maintaining radio connectivity and therefore always receive higher priority than user-plane traffic.

NO.25 Which of the following AAUs support vertical beamforming?(Select All that Apply)

32T32R

8T8R

64T64R

4T4R

Explanation
According to the 5G Beamforming: An Engineer’s Overview, 32T32R and 64T64R AAUs support vertical beamforming. AAU stands for Active Antenna Unit, which is a type of antenna that integrates RF and antenna functions in one unit. Vertical beamforming is a technique that uses multiple antenna elements in a vertical array to form beams in different elevation angles. 32T32R and 64T64R AAUs have enough antenna elements to support vertical beamforming, while 8T8R and 4T4R AAUs do not have enough antenna elements to support vertical beamforming effectively.

NO.26 Which of the following problems may cause SCTP link disconnection over the N2 interface?
(Select All that Apply)

Routes are not configured.

PLMN configurations are incorrect.

Physical ports are faulty.

The SCTP port configuration is incorrect.

According to the Troubleshooting Guide for Huawei 5G Base Stations , the possible causes of SCTP link disconnection over the N2 interface are as follows:
Routes are not configured: If the routes between the base station and the core network are not configured correctly, the SCTP link cannot be established or may be disconnected.
PLMN configurations are incorrect: If the PLMN configurations on the base station and the core network do not match, the SCTP link cannot be established or may be disconnected.
Physical ports are faulty: If the physical ports on the base station or the core network are faulty, such as damaged cables, loose connectors, or port errors, the SCTP link cannot be established or may be disconnected.
The SCTP port configuration is incorrect: If the SCTP port configuration on the base station or the core network is incorrect, such as using a reserved port number or a conflicting port number, the SCTP link cannot be established or may be disconnected.

NO.27 In the drive test tool, which of the following indicators cannot be monitored?

SSB RSRP

PDSCH IBLER

CQI

SRS SINR

Most drive-test tools can monitor radio measurements such as RSRP, CQI, and SRS SINR, but PDSCH IBLER is generally not directly available.

NO.28 In the cell search process in 5G SA, a UE completes frame synchronization after reading the SS.

True

False

Explanation
According to the 5G SA Cell Search & Network Entry Matrix, a UE completes frame synchronization after reading the MIB, not the SS. The SS (Synchronization Signal) is used for initial detection and coarse timing synchronization, but it does not provide enough information for frame synchronization. The MIB (Master Information Block) is part of the SSB (Synchronization Signal Block) and contains essential system information, such as system frame number and subcarrier spacing, which are needed for frame synchronization.

NO.29 Under the same gNodeB, an NR TDD cell supports the same maximum number of RRC_CONNECTED UEs as an NR FDD cell.

True

False

Explanation
According to the Radio Resource Control, the maximum number of RRC_CONNECTED UEs depends on the number of available C-RNTIs (Cell Radio Network Temporary Identifiers) in a cell. The number of C-RNTIs is limited by the size of the RNTI field in the DCI (Downlink Control Information) format. For NR TDD cells, the RNTI field size is 16 bits, which allows up to 65,536 C-RNTIs. For NR FDD cells, the RNTI field size is
14 bits, which allows up to 16,384 C-RNTIs. Therefore, an NR TDD cell can support more RRC_CONNECTED UEs than an NR FDD cell under the same gNodeB.

Loading …

Get 100% Real Free HCIA-5G H35-580_V2.0 Sample Questions: https://www.dumpsreview.com/H35-580_V2.0-exam-dumps-review.html

Latest Exams Dumps & Reviews

[Full-Version] 2026 New H35-580_V2.0 Actual Exam Dumps, Huawei Practice Test [Q14-Q29]

examdumps

Leave a Reply Cancel reply

examdumps

Related Posts

2026 Correct and Up-to-date WGU Financial-Management BrainDumps [Q48-Q70]

[Aug 23, 2026] New Microsoft DP-600 Dumps with Test Engine and PDF (New Questions) [Q57-Q71]

[Q217-Q232] Tested Material Used To API-1169 Test Engine Exam Questions in here [Aug-2026]

Leave a Reply Cancel reply