[2023] NCP-MCI-6.5 Exam Dumps, Test Engine Practice Test Questions [Q18-Q34]

Rate this post

[2023] NCP-MCI-6.5 Exam Dumps, Test Engine Practice Test Questions

Pass NCP-MCI-6.5 exam [Jul 18, 2023] Updated 174 Questions

The NCP-MCI-6.5 certification exam is designed to test the knowledge and skills of IT professionals in deploying, managing, and troubleshooting Nutanix’s Multicloud Infrastructure platform. NCP-MCI-6.5 exam covers a wide range of topics including virtualization, storage, networking, security, and automation. Successful completion of this certification exam demonstrates that the professional has the knowledge and skills required to design and manage a Nutanix Multicloud Infrastructure environment.

NEW QUESTION 18
A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.
What is the effect on the replicas of the VMs?

Some VM data may be lost

No VMs lose data if the node has two or more SSDs

Some VMs may reboot and gain access to data

No VMs lose data because of RF2

NEW QUESTION 19
Which component ensures uniform distribution of data throughout the cluster to eliminate hot spots and speed up rebuilds?

Cassandra

Distributed Storage Fabric

High Availability

Acropolis App Mobility Fabric

NEW QUESTION 20
After configuring modules for a Remote Syslog Server, the settings are as shown. The administrator notices that even though the level parameter is set to EMERGENCY, that all monitor logs are being sent.
What is the likely cause of this issue?

A second rsyslog server is configured to send all monitor logs.

Having the Module Name set to STARGATE sends all monitor logs regardless of the level.

A Log Level of EMERGENCY includes all monitor logs.

The true setting for Include Monitor Logs sends all monitor logs regardless of the level.

NEW QUESTION 21
A guest VM should be able to tolerate simultaneous failure of two nodes or drives.
What are the minimum requirements for the Nutanix cluster?

3 nodes with cluster RF 3 and container RF 3

3 nodes with cluster RF 3 and container RF 2

5 nodes with cluster RF 2 and container RF 3

5 nodes with cluster RF 3 and container RF 3

NEW QUESTION 22
An Administrator is working on a one-node ROBO cluster configurations
Which statement is true for this configuration?

Witness vm required to break cluster quoram

Supported hardware is NX-1175-G5 and G6

witness vm should be 8vcp and 20gb ram

the minimum RPO 8 hours required

NEW QUESTION 23
CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.

On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.

On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.

On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.

NEW QUESTION 24
Refer to the exhibit.

An administrator is trying to implement the solution that is shown in the exhibit, but has been unsuccessful.
Based on the diagram, what is causing the issue?

A remote Witness VM

Active containers in both sites

Network latency

Unsupported hypervisor

NEW QUESTION 25
The customer is seeing high memory utilization on a mission critical VM. Users report that the application is unavailable. The guest OS does not support hot add components.
How should the administrator fix this issue?

Access the CVM on the host that is running the VM:
*Open acli
*Run a command to increase the amount of RAM assigned to the VM

From the Prism web console:
*Go to the VM dashboard
*Select the VM from the VMs list
*Choose Update
*Adjust the amount of memory assigned to the VM

Go to Control Panel in the VM:
*Select the Computer Properties
*Increase the amount of RAM assigned

During the next maintenance window:
*Select the VM from the VMs list
*Perform a graceful shutdown

NEW QUESTION 26
What is the function of the virbr0 bridge on AHV?

To carry all traffic between the user VMs and the upstream network.

To carry management and storage communication between user VMs and the CVM.

To carry management and storage communication between user VMs and AHV host.

To carry storage communication between the guest VMs and the CVM

Explanation
http://www.vstellar.com/2019/01/10/ahv-networking-part-1
-basics/#:~:text=AHV%20Network%20Architecture&text=virbr0%20is%20an%20internal%20switch,virbr0)%2

NEW QUESTION 27
What are two minimum prerequisites for live migration to succeed? (Choose two.)

All AHV hosts have IP addresses in the same subnet

All AHV hosts must be configured on the same VLAN

All VMs have an IP address in the same subnet

All VMs are configured for the same VLAN

NEW QUESTION 28
An administrator is tasked with configuring networking on an AHV cluster and needs to optimize for maximum single VM throughput.
Which bond mode should the administrator select?

Active-Active with Mac pinning

Active-Active

Active-Backup

No Uplink Bond

NEW QUESTION 29
Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)

Environments use Network Address Translation.

Prism Elements and Prism Central art in different subnets.

Environments do not have Internet access.

Prism Elements and Prism Central have proxy configured.

Environments use the 192.168.5.0/24 CVM management network.

NEW QUESTION 30
An administrator is concerned about the amount of data that a VM reading and writing to the storage fabric.
Which metric will provide that data?

Host Hypervisor IO Bandwidth

Host Disk IOPS

VM Storage Controller IOPS

VM Storage Controller Bandwidth

NEW QUESTION 31
An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

Cluster IO, Network, Database and App Server CPU

Cluster CPU and Memory Only

Cluster IO, CPU, Memory and Database and App Server CPU

Cluster IO, CPU, Memory, Network, App Server CPU

NEW QUESTION 32
In a default configuration of an AHV cluster, a single node fails.
What happens to the running VMs on that node?

The cluster restarts all VMs in the event of a host failure

The VMs do a live migration to the master node in the cluster

The VMs do a live migration to any other node in the cluster

The cluster attempts to restart VMs on other hosts

NEW QUESTION 33
Which component can be associated with a storage policy?

Subnet

Catalog

Category

A storage policy can be associated with a VM. A storage policy is a set of rules that define how data objects are stored and protected. It specifies the characteristics of storage, data protection, and data placement for virtual disks that are assigned to a VM. Subnets, catalogs, and categories are not associated with storage policies.https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-vpc_2022_6:mul-cluster-storage-policy-summary-view-pc-r.html

NEW QUESTION 34
An administrator needs to limit the amount of storage space that data stored in single container can consume.
Which action should the administrator take?

Enable reservation for rebuild capacity

Set an advertised capacity for the container

Store VM snapshots in a different container

Thick prevision the container

The best way for the administrator to limit the amount of storage space that data stored in a single container can consume is to set an advertised capacity for the container. This will ensure that the data stored in the container doesn’t exceed the set limit, and it will also help prevent any potential performance issues due to resource contention. Additionally, the administrator should consider thick provisioning the container, which will pre-allocate the amount of storage space that can be used by the container. This will help ensure that the data stored in the container doesn’t exceed the advertised capacity.

Loading …

Nutanix NCP-MCI-6.5 is a certification exam that validates the skills and knowledge of IT professionals in managing and deploying Nutanix’s multicloud infrastructure. NCP-MCI-6.5 exam is designed to test the candidate’s ability to analyze, design, deploy, and manage a Nutanix-based multicloud infrastructure. Nutanix Certified Professional – Multicloud Infrastructure (NCP-MCI) v6.5 exam certification is an industry-recognized credential that demonstrates the candidate’s expertise in the latest multicloud infrastructure technologies and practices.

Nutanix NCP-MCI-6.5 Real 2023 Braindumps Mock Exam Dumps: https://www.dumpsreview.com/NCP-MCI-6.5-exam-dumps-review.html