NO.36 An LTM Specialist needs to provide access to a 8BG-IP to device for a company’s support person access to the BIG IP device, but are NOT allowed to change any settings All support the support remote access to the BIG-IP device, but are NOT allowed to change ant settings. All support have accounts in the company’s Active Directory Which method is appropriate to provide access for the support personnel to the BIG-JP device?

NO.37 An LTM Specialist has detected that a brute force login attack is occurring against the SSH service via a BIG-IP management interface. Login attempts are occurring from many IPs within the internal company network. BIG-IP SSH access restrictions are in place as follows:

The LTM Specialist has determined that SSH access should only occur from the 192.168.1.0/24 and 172.16.254.0/23 networks.
Which tmsh command should the LTM Specialist use to permit access from the desired networks only?

NO.38 An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.
Which values should the LTM Specialist enter for interval and timeout?

NO.39 An LTM Specialist needs to deploy a virtual server that will load balance traffic targeting https://register.example.com to a set of three web servers. Persistence needs to be ensured. No persistence mirroring is allowed SSL offloading is required.
A fourth web server with fewer resources will be used to handle requests from engine bots to https://register.example.comvrobots.txt by an iRule. The (Rule will use the HTTP_REQUEST event. .
What are the required profile and persistence settings to implement this

NO.40 An LTM Specialist creates an Analytics wide to show the type of browsers used to access a certain application. However, the generated statistics only sum up all transaction for that application under one item called ‘ Aggregated.” What should the LTM Specialist do to resolve this problem?

NO.41 The network team introduces a new subnet 10.10.22.0/24 to the network. The route needs to be configured on the F5 device to access this network via the 30.30.30.158 gateway.
How should the LTM Specialist configure this route?

NO.42 An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member.
What is an appropriate SNAT configuration in this situation?

NO.43 An LTM Specialist needs to force only FTP traffic, sourced from subnet 10.10.10.0/24 to virtual server 10.10.20.1 to the new FTP1 server. The following virtual servers are configured on the LTM device:
Traffic sourced from 10.10.10/24 must use the specific pool member for load balancing.
Which configuration change is needed to meet the requirements?

NO.44 A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
A new HITP server has been deployed on an LTM device. The application running on the server must be monitored by the LIM device. The following is required:
When the server is unavailable, it will send an HTTP status code of 200 in response to a request for the status html page.
When the server is available. I will send and HTTP status code of 201 in response to a request for the status html page.
When the 200 status code is received, the pool member should receive No new connections.
Which configuration change should be made to meet these requirements?

NO.45 The network team has recently added a new syslog server with IP address 10.1.1.1.
Which command adds the new syslog entry on the F5 LTM device?
A)

B)

C)

D)

NO.46 What should an LTM Specialist configure on an LTM device to send AVR notification emails?

NO.47 An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.

NO.48 What should the LT’M Specialist add to the virtual server?

NO.49 An LTM Specialist decides to offload SSL traffic on the LTM device instead of just passing it through. The LTM Specialist needs to change the configure from a Performance (Layer 40 virtual server to a Standard virtual server with SSL offload.
Which two element the LTM Specialist consider when performance this task? (Choose two.)

NO.50 A node is assigned two monitors as seen in this configuration.

What is the status of a member that runs on that node and listens on port 443?

NO.51 Refer to the Exhibit.

An LTM Specialist notices that two members in a pool are overloaded. To relive the existing members a fourth member (10.128.20.14) is brought up.
How many member will receive and process new connections?

NO.52 An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.
TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.
TLS enabled virtual servers utilize certificates based on 2048-bit keys During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.
What will happen in this scenario?

NO.53 An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG-IP device to the device group. The new device can deliver twice the performance of the other two devices.
The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is always selected to take over a traffic group in the event of a failover.
Which failover method is most appropriate?

NO.54 Refer to the exhibit.

An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.
Which command sill correct the issue?

NO.55 An LTM device configured with a management IP address and route and a series of self-IPs and TMM routes. Both management and TMM have a routing entry for 101 10/24 Application traffic is being load balanced and sent to pool member 10.1.1.123 with SNAT Automap and configured.
Which route will the LTM device use?

NO.56 Six servers have a varying number of connections that change based on the user load.
Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?

NO.57 An unwanted IP address tries to connect to the configuration utility via Self IP An LTM Specialist needs to block the attempts based on the IP address.
How should the ITM Specialist block the attempts without affecting other users?

NO.58 A custom TCP application using a single server is being migrated to the LTM device. A server is being added to the pool. The application is known to violate the TCP protocol RFC. The application currently works without error from a user perspective.
Which virtual server type is appropriate in this situation?