[Q275-Q294] View PD1-001 Exam Question Dumps With Latest Demo [Aug 19, 2022]

4.5/5 - (2 votes)

View PD1-001 Exam Question Dumps With Latest Demo [Aug 19, 2022]

Free PD1-001 Test Questions Real Practice Test Questions

Q275. Which of the following are primary colors in the additive color scheme? (Select TWO).

Magenta

Blue

Yellow

Black

Red

Q276. Which of the following can affect a persons perception of color? (Select TWO).

Gamut mapping

Humidity levels

Ambient lighting

Paper brightness

Temperature setting

Q277. A customers PC cannot print to a network print device. The technician is able to connect to that device by using a crossover cable to a laptop. Which of the following is the MOST likely cause of the issue?

Defective CAT5 cable

Incorrect MAC address

Incorrect default gateway

Defective device network card

Q278. A technician is troubleshooting a printing problem. The manufacturers technical hotline wants to know the print driver version in use on the customers PC. The version can be found:

on the printers set-up webpage.

on the PC by running the IPCONFIG command.

on the printer driver test page sent from the PC.

in the printer port settings located on the PC.

Q279. The PDF file size that would use the LEAST amount of network bandwidth would be:

1MB.

137MB.

221MB.

22KB.

Q280. The polygon mirror is located in which of the following components?

Developer unit

Scanner unit

Fuser unit

Laser unit

Q281. The laser/LED creates a latent image on the negatively charged photoconductor by:

heating the image area.

discharging the image area.

cleaning the image area.

charging the image area.

Q282. When a technicians toner vacuum starts losing suction power, the MOST likely thing a technician should do is:

order a new toner vacuum.

empty the toner vacuum filter into a trash can.

replace the toner vacuum filter.

remove the toner filter and clean it.

Q283. Which of the following are located in the laser unit?

Erase lamps

Mirrors

Toner

Charge roller

Lenses

Q284. Which of the following applies a uniform charge to the photoconductor?

Charge Corona

Charge Couple Device (CCD)

Laser Unit

Light Emitting Diode (LED) array

Q285. After printing an internal test page, a customer feels that gray patterns on the print have a magenta tint. Which of the following should the technician recommend the customer do?

Reset the color adjustment setting in the printer driver.

Perform the color calibration procedure.

Reset the color adjustment setting in the application software.

Replace the magenta toner cartridge.

Q286. A customer desires that all print jobs to their color MFD product by default come out in black and white. Which of the following would be the default setting a technician would use?

Multifunction device

TCP/IP settings

Print driver

Color management

Q287. Which of the following forms will describe hazards and other properties of toner?

Network Settings report

Configuration report

Printer quality pages

MSDS

Q288. Which of the following electrical components utilizes infrared LEDs to detect switching or a change of state?

Resistor

Capacitor

Sensor

Switch

Q289. On an output page with a large red square printed on it, a thin yellow line can be seen along the lead edge of the square. Which of the fol owing would correct this problem?

Adjust the strength of the red hue to compensate.

Lower the density of the yellow content.

Use the color registration adjustment procedure.

Use a background removal feature from the operator mode.

Q290. Toner cartridges should always be disposed of following manufacturers guidelines because toner:

is toxic and can cause serious burns on skin.

is non-biodegradable and has specific disposal guidelines.

emits toxic gases which will harm users.

can cause magnetic interference in other electrical devices.

Q291. Which of the following is used to permanently bond the toner to the media?

Transfer roller

Charge roller

Fuser unit

Laser

Q292. A technician finishes working on a clients unit and is preparing to leave when the client asks them about the problem they were having. Which of the following is the BEST way to respond?

Explain to the client in appropriate terminology what was wrong, what was done to rectify the issue and ask if they have any other questions you can help with.

Explain to the customer in technical detail, how the device works, and explain how the repair was performed while showing them the schematics.

Tell the client that the unit was broken and that this model is known for this kind of problem happening all the time. The problem has been fixed but might need to be addressed again in the future.

Tell the client that the unit was broken and it just needed some maintenance. It should work for a while.

Q293. A NIC uniquely identifies a network device through which of the following?

SSID

MAC address

WINS

TCP/IP address

Q294. A customer reports that they are unable to print to their device. The technician discovers that no one in the office can print to the device but it is ready and can be pinged. Which of the following should the technician check FIRST?

Print Queue

Driver Version

Web Interface

Driver Settings

Loading …