Pass Your 5V0-42.21 Exam at the First Try with 100% Real Exam Questions [Q18-Q38]

Rate this post

Pass Your 5V0-42.21 Exam at the First Try with 100% Real Exam Questions

New VMware 5V0-42.21 Dumps & Questions Updated on 2023

QUESTION 18
Refer to the exhibit.

An MSP is designing a solution for a merger of Customer A and Customer B to Customer A’s enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?

4 segments

2 segments

6 segments

5 segments

QUESTION 19
A customer is migrating a branch site with a VMware SD-WAN Edge coexisting with the CE. The Edge will be connected to internet link directly while connecting to the CE via a Layer 3 LAN switch.
MPLS underlay is the preferred path for communication from this site to branch sites that have no VMware SD-WAN Edges. Communication from this site to branch sites that have VMware SD-WAN Edges should go through overlay.

Use BGP as the rout.ng protocol on UK Edge and flag its BGP neighbor to the Layer 3 LAN switch as Uplink.

Use BGP as the routing protocol on the Edge and filter prefixes from CE using Uplink Community

Use BGP as the routing protocol on the Edge and flag its HGP neighbor to PE as Uplink.

Use BGP as the routine, protocol on the Edge and flag its BGP neighbor to GE as Uplink.

QUESTION 20
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?

None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)

None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)

None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)

None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)

QUESTION 21
An enterprise has deployed a VMware SD-WAN solution with Edges in many different located to different Partner Gateways.
Which design makes it possible to have dynamic branch to branch VPN tunnels between any two Edges?

Dedicated at least one Gateway as a Controller, and few initial data plane packets will travers the Controller before dynamic tunnel is established between the two branches.

Add Controller role to each Partner Gateway.

Configure each partner Gateway as a Controller.

Dedicate at least one Gateway as a Controller, and no data plan packets will traverse the Controller before dynamic tunnel is established between the two branches.

QUESTION 22
A customer would like to use a VNF firewall on the VMware SU-WAN 600 series Edge.
Where do the Edge firewallrules of the VNF apply?

Underlay

Overlay

WAN side

LAN side

QUESTION 23
Which statement is correct about VMware SD-WAN Orchestrator user roles and their associate privileges?

Customer Support User can view and manage then company’s network

Standard Admin User can view but cannot manage their customer.

Superuser: User can view but cannot create additional admin.

Enterprise read only: User can view but not modify configurations.

QUESTION 24
Given a VMware SD WAN Branch Edge with Dual Internet links A and B:
* Link A has 50 Mb capacity and latency 10ms
* Link H has 50 Mb capacity and latency 10ms
A database backup of 40Mbps is parted, and the traffic classified as low priority bulk traffic.
Which statement is correct?

DMPO will perform pen How load balancing.

Packet duplication will take plant? to ensure both links are optimized.

Packets will be sent nut the highest latency link first as this is low priority bulk traffic

Link Aggregation may take place, and both links could be used.

QUESTION 25
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?

UDF 2426

TCP 80

TCP 443

UDP 500

QUESTION 26
A network architect from a service provider is designing an architecture using a VMware SD-WAN Partner Gateway handoff.
Which dynamic routing protocol should the engineering choose?

RIP Version 2

OSPF

Static

BGP

QUESTION 27
Which deployment model ensures that management and control plane is cloud-delivered while data continues to flow on-premises between VMware SD-WAN nodes that remain on-premises?

Hosted SD-WAN Orchestrator/Controller

On-premises SD-WAN Orchestrator/Controller

Partially on-premises

All on-premises

QUESTION 28
Company A has recently acquired Company B and needs to establish network connectivity. Company A has only Cisco for firewalls and VPN. Company B is using VMware SD-WAN.
Which VMware SD-WAN Cloud VPN solution should an administrator configure to establish connectivity?

Branch to Non VMware SD-WAN Site.

Branch to SD-WAN Hub

Branch to Main Office VPN

Branch to Branch VPN

QUESTION 29
A customer is using VMware SD-WAN and has branches in different continents where the Edges are assigned with local Gateways.
Which Gateway should be used so all the branches can build tunnels with one another?

Regional Gateway

Super Gateway

Primary Gateway

Alternate Gateway

QUESTION 30
A customer has a hybrid VMware SD-WAN deployment and wants to use the SD-WAN Service Reachable feature on the private WAN.
What is the main dependency that must be met for the feature to work?

Internet reachability via the private WAN

Gateway IPs must be routed in the overlay

Default route learned via dynamic routing

Static mute for gateway IPs on the edge

QUESTION 31
Refer to the exhibit.

An MSP is designing a solution for a merger of Customer A and Customer B to Customer A’s enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?

4 segments

2 segments

6 segments

5 segments

QUESTION 32
A VMware SD-WAN customer has a requirement to enable single sign-on (SSO) authentication to their existing provider (idp) for access to their Orchestrator account.
Which authentication protocol is supported?

OpenID Connect (OlDC)

LDAP

SAML 2.0

TACACS+

QUESTION 33
A service provider needs to upgrade a gateway to a new software version.
Which step in needed to complete the upgrade process?

Re-assign the Gateway to a new gateway Pool with the appropriate software version, and then run ‘sudo apt-get update” from the Gateway console.

Create a new disk partition to save the new software image to, modify the boot order via the Gateway BIOS to boot to the new partition, and then reboot the gateway.

From the Orchestrator, select the check-box next to the appropriate gateway, choose ”Assign Software image”, and then select the version for the upgrade.

Copy the new image to/var/lib/velocloud/software_update.tar, and then run the upgrade thescript from the console.

QUESTION 34
An administrator has been receiving complaints about their SaaS business collaboration apps.
Which network service should the administrator use to resolve the issue?

Backhaul

Multi-Path

CoS mapping

Direct

QUESTION 35
An administrator is looking for a cost effective model of hardware-based Edge for some branch offices. The device must be mounted in rack cabinet, and to meet performance requirements and projected growth, the appliance must support up to 2 Gpbs bandwidth.
Which Edge modelsatisfies these requirements?

Edge 3400

Edge 540

Edge 510

Edge 620

QUESTION 36
A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer’s branches and data centers. The network architect would like to achieve control plane redundancy.
Which action, if any, should be taken to meet this goal?

Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already

Multiple VCFs at data centers can becontoured to function as route reflectors to achieve control plane redundancy.

VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.

VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy

QUESTION 37
The VMware SD-WAN solution is comprised of Orchestrator, Gateway, and Edge. The architecture ensures separation and secure communication between the management, control, and data plane of the solution.
The management plane consists of the VMware SD-WAN Orchestrator, and the control plane is comprised of the VMware SO-WAN Gateway/ Controller. Which statement correctly describes this situation?

VMware SD-WAN Edges/Gateways establishes a Transport Layer Security (TLS) 1 2 encrypted session to the VMware SU-WAN Orchestrator

To make the entire solution to work property, TCP port 443 and HOP port 500 and UDP port 4500 are required to open in the firewall rule, if Edge is deployed behind a Firewall.

There is impact on data plane when the Edge loses connectivity to the management plane. The operator only loses the visibility of the Edge from Orchestrator and cannot make configuration changes on the Edge until the management plane connectivity is resumed.

Traffic between VMware SD-WAN Edges and from VMware SD-WAN Edges to VMware SD-WAN Gateways uses VMware SD-WAN Management Protocol (VCMP) tunneling over User Datagram Protocol (UDP) port 2427. secured with Internet Protocol Security (IPSec)

QUESTION 38
An Enterprise customer just acquired a new company, and the Network Enterprise administrator was tasked to integrate over 20 new branches into their existing SD-WAN network. However, these branches have overlapping IPs with the existing branches subnets.

Configure a NAT hand off rule at the VMware SD WAN gateway assigned to these new blanches, translating the new branch subnets into a new nan-overlappingsubnet

Configure a LAN-side NAT rule at the branchdevice settings, translating its subnets into a new non-overlapping subnet

Configure a NAT firewall rule in each branch, translating itssubnets into a new non-overlapping subnet

Configure a policy based NAT tor each branch translating its subnets Into a new non-overlappingsubnet