Free EMC D-PEMX-DY-23 Test Practice Test Questions Exam Dumps [Q76-Q91]

4.3/5 - (3 votes)

Free EMC D-PEMX-DY-23 Test Practice Test Questions Exam Dumps

Prepare Top EMC D-PEMX-DY-23 Exam Audio Study Guide Practice Questions Edition

NEW QUESTION 76
Refer to the exhibit.

How many internal server-facing ports are available on this I/O module for the MX7000 chassis?

NEW QUESTION 77
What is the maximum number of mezzanine cards that can be installed in an MX840c?

NEW QUESTION 78
To which two components do the front fans of the MX7000 provide cooling?
(Select 2)

MMs

PSUs

IOMs

Servers

NEW QUESTION 79
Why is the backup lead configuration important in an MCM Group?

The configuration allows sharing of the lead chassis IOMs and Management Module databases.

The backup lead chassis facilitates management of systems when the existing lead chassis fails.

The backup chassis is promoted automatically if the lead chassis fails.

This configuration allows configuration changes from the backup chassis.

NEW QUESTION 80
A server administrator wants to configure RAID on drives that are assigned to a compute sled.
Which interface can be used to complete the task?

OIDC

Storage sled assignment

RAID Controller settings

iDRAC

NEW QUESTION 81
What can be used as the firmware update source for OME-M within an MX chassis?

Server Update Utility
Baseline from a Catalog

Server Update Utility
System Live Image (SLI)

Dell Update package
System Live Image (SLI)

Dell Update Package
Baseline from a Catalog

NEW QUESTION 82
A company receives their first MX7000 chassis. They connect all the provided power supply cables into two different PDUs on different power grids for redundancy. Each of the six power supplies is cabled and has green LEDs. One Management Module is present along with all system fans. Grid redundancy is configured as the power redundancy mode.
The chassis is fully populated with six compute sleds and one IOM but only two of the six sleds will power on.
What is the possible reason for this issue?

An additional IOM is required to power on and manage the remaining sleds.

Two Management Modules are required to power on the populated chassis.

Power supply unit redundancy policy was not used.

Mixed high line and low line AC inputs in the same chassis is not supported.

NEW QUESTION 83
An administrator is mapping the drives of an MX5016s. The disk must be split in groups among multiple compute sled slots.
Which storage configuration must be used?

Split-Assigned mode

Enclosure-Assigned mode

Drive-Assigned mode

NEW QUESTION 84
A server administrator is deploying a VMware vSphere cluster and configuring High Availability on a PowerEdge MX7000 modular system.
Which configuration is required?

PERC MX745P

Enclosure-assigned storage

SAS IOM setup in redundant mode

Drive-assigned storage

NEW QUESTION 85
A data center team is working on a solution to monitor and manage data center devices from anywhere.
Which feature can be configured to perform these tasks?

OIDC

OME-M

QAT

OMM

NEW QUESTION 86
In an MX7000, which components are cooled by the rear fans?

Fabric A, B, and C IOMs only

All compute and storage sleds

Management Modules only

Fabric A, B, and C IOMs and the Management Modules

NEW QUESTION 87
What are the port specifications of the MX8116n FEM?

Two QSFP56-DD interfaces 16 internal 100 GbE server-facing or 8 internal 25 GbE server-facing

Two QSFP56-DD uplink ports 8 internal 100 GbE server-facing or 16 internal 25 GbE server-facing

Four QSFP56-DD interfaces 8 internal 100 GbE server-facing or 16 internal 25 GbE server-facing

Four QSFP56-DD interfaces 16 internal 100 GbE server-facing or 8 internal 25 GbE server-facing

NEW QUESTION 88
What is the port configuration of the MX9116n FSE?

32 internal 25 GbE server facing ports
12 QSFP28-DD ports
2 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports

32 internal 25 GbE server facing ports
10 QSFP28-DD ports
4 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports

16 internal 25 GbE server facing ports
10 QSFP28-DD ports
4 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports

16 internal 25 GbE server facing ports
12 QSFP28-DD ports
2 100 GbE QSFP28 uplink ports
2 100 GbE QSFP28 unified ports

NEW QUESTION 89
What is the port configuration of an MX5108n switch?

16 x internal 25GbE ports
4 x 40GbE QSFP+ ports
2 x 100GbE QSFP28 ports
1 x 10GbE RJ45 Base-T port

8 x internal 25GbE ports
1 x 40GbE QSFP+ port
2 x 100GbE QSFP28 ports
4 x 10GbE RJ45 Base-T ports

8 x internal 25GbE ports
2 x 40GbE QSFP+ ports
1 x 100GbE QSFP28 port
4 x 10GbE RJ45 Base-T ports

16 x internal 25GbE ports
1 x 40GbE QSFP+ port
2 x 100GbE QSFP28 ports
4 x 10GbE RJ45 Base-T ports

NEW QUESTION 90
Which MX7000 component is responsible for Fabric Consistency Check?

Management Module

Lifecycle Controller

Fabric Switching Engine

iDRAC

NEW QUESTION 91
What compute sled model best supports the following requirements?
4 Node Database Cluster Heavy transactional workload 16 Processors
24 TB of DDR4 Memory
40 TB of Disk Space Maximum of 200,000 IOPS

4 x MX840C 16 Processors
24 TB of DDR4 Memory
40 TB of Disk Space based on SAS SSD Drives

4 x MX840C 16 Processors
24 TB of DDR4 Memory
40 TB of Disk Space based on NVMe Drives

8 x MX750C 16 Processors
16 TB of DDR4 Memory
45 TB of Disk Space based on NVMe Drives

8 x MX740C 16 Processors
16 TB of DDR4 Memory
50 TB of Disk Space based on SAS SSD Drives

Loading …